

| Item | Details | 
|---|---|
| Description | AC650-128AP mainframe (10*GE ports, 2*10GE SFP+ ports, with the AC/DC adapter) | 
| Part Number | 02355NCG | 
| Model | AC650-128AP | 
| First supported version | V200R022C10 | 
1  | GE  | 2  | DC 12V  | 
3  | 10GE  | 4  | USB  | 
5  | CONSOLE  | -  | -  | 
| Port | Connector Type | Description | Available Components | 
|---|---|---|---|
| GE | RJ45 | 10 x 10/100/1000BASE-T Ethernet electrical ports | Network cable  | 
| 10GE | SFP+ | 2 x 10GE SFP+ Ethernet optical ports | Optical module  | 
| DC 12V | DC connector | DC input connector | 12 V DC power adapter  | 
| CONSOLE | RJ45 | Console port | Console cable  | 
| USB | USB 2.0 Type A | USB port connecting to a USB flash drive or other storage device to extend the storage space. | USB storage device  | 
1  | Service port indicators  | 2  | RST button  | 
3  | PWR indicator  | 4  | SYS indicator  | 
5  | USB indicator  | 6  | CLOUD indicator  | 
| Silkscreen | Name | Color | Status | Description | 
|---|---|---|---|---|
| PWR | Power module indicator | - | Off | The system is not powered on or there is an internal power supply failure. | 
| Green | Steady on | Power supply is normal. | ||
| SYS | System status indicator | - | Off | The system is not running. | 
| Green | Steady on | The system is being powered on or restarted. | ||
| Green | Blinking once every 0.25s (4 Hz) | The system is starting. | ||
| Green | Slow blinking (0.5 Hz) | The system is running properly. | ||
| Red | Steady on | The system is faulty. | ||
| USB | USB indicator | - | Off | No USB device is connected. | 
| Green | Steady on | A USB device is connected and working properly. | ||
| CLOUD | CLOUD indicator | - | Off | The device is not connected to a cloud management platform or the connection is interrupted. | 
| Green | Steady on | The connection to a cloud management platform is normal. | ||
| Green | Blinking once every 0.25s (4 Hz) | The device is connecting to a cloud management platform. | ||
| - | GE electrical service port indicator | - | Off | The port is not connected or has been shut down. | 
| Green | Steady on | The link is established. | ||
| Yellow | Blinking | The port is sending or receiving data. | ||
| - | 10GE optical service port indicator | - | Off | No link is established on the port. | 
| Green | Steady on | The link is established. | ||
| Green | Blinking | The port is sending or receiving data. | 
| Silkscreen | Name | Description | 
|---|---|---|
| RST | Reset button | 
  | 
| Item | Specification | 
|---|---|
| Installation Type | 
  | 
| Dimensions without packaging (H x W x D) [mm(in.)] | Basic: 43.6 mm x 250 mm x 210 mm (1.72 in. x 9.84 in. x 8.27 in.) Maximum: 43.6 mm x 250 mm x 215 mm (1.72 in. x 9.84 in. x 8.46 in.)  | 
| Weight without packaging [kg(lb)] | 1.9kg | 
| Storage | Nand FLASH 1GB | 
| Console port | RJ45 | 
| Maximum power consumption [W] | 23.58 W | 
| Maximum heat dissipation [BTU/hour] | 80.45 BTU/hour | 
| Power supply mode | DC adapter | 
| Service port surge protection | 6 kV in common mode | 
| Types of fans | None | 
| Maximum number of physical ports on the entire device | 2 x 10GE (SFP+) + 10 x GE (RJ45) | 
| Long-term operating temperature [°C(°F)] | 0°C to 45°C (32°F to 113°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) | 
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) | 
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing | 
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) | 
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 | 
| Ground | Ground | 
| USB | 1 x USB 2.0 (host type A) port |